On the Bench - Patrol Air Cushion Vehicle

Started back a little while ago, the Gecko US Navy Patrol Air Cushion Vehicle(PACV) or as some may say, a hovercraft.  The kit is well molded with lots of details, including a well done interior with options to model the front door in the open position.

Probably one of the trickiest parts of the build is the machine gunner stand on the interior, there are no real attach points for strength, and lining up the bars to fit into both the slots in the floor and roof are tricky.  I used Testors liquid cement to "tack" the bars in place, then dry fitted the roof to line up the bars.  Once lined up, I put a couple of drops of CA on the joints and left to dry.

I was also concerned with painting, so I pre-painted some of the areas that may be tricky for the airbrush to reach once I start final painting.

It is a good kit, and I would recommend it.